Flastic heater characteristics, the application and maintenance of the flange -type heat heater

The French heater structure is to welded multiple U -shaped heating pipes on the plane Tu Fan,

 which is also called large heater with large power. The static liquid and vapor are heated. 

The key is heated in open, closed water solution and other utensils and cycles.

 Flastic electric heaters Flag heater characteristics:

1. Long use period, with a variety of maintenance system software (blocking cover, cable waterproof 

joint, etc.), which can be trusted;

2. Small body shape and large heating output power, which is 2 to 4 times that of gas heating surface loads;

3. It can be heated to various media in various places, like water and oil, oil steam, metal material aquatic solution, such as explosion -proof places;

4. Strong predictability: The heating system software can configure the control box to automatically automate;

5. Optional materials: carbon steel, stainless steel plate, copper, titanium pipe;

6. Surface treatment: Aquatic stains.

 The application and maintenance of the flange -type heat heater:

1. Pay attention to distinguish between triangular connections and star -shaped connections. 

The application voltage cannot exceed the rated voltage;

2. The electric heating pipe must be reasonably grounded;

3. Apply the correct model of the type (moderate diameter and suitable power cord specifications), 

and apply a suitable clamping tool to hold the cable on the cable;

4. After a certain period of time during the work of the heating pipe, it is proposed to use the soft 

cloth to use the soft cloth for reflective scrubbing before, and the chemical cleaning solution isprohibited.

 Flastic electric heaters product use:

Flastic electric heater is used for water, oil, oil, and the heating of water, oil, and corrosive liquids for 

water tanks, electric boilers, diagnosis and treatment machinery, chemical industry, pipelines, reaction 

cans, assistants, water Steam heating, water -soluble grooves, electrolytic grooves are heated and 

insulated. Installation method: Welded on the utensils to connect with the mother France and the 

heating pipe.